FUTEK IPM600 (D610) Digital Display User Manual
Ipm600 series instruction manual
Table of contents
Document Outline
- F371 Eng Rev.1.16
- Cautions and Requests for Use
- CONTENTS
- 1. APPEARANCE DESCRIPTION
- 2. SETTING MODES
- 3. CONNECTION
- 4. CALIBRATION
- 4-1. Equivalent Input Calibration Procedure
- 4-2. Actual Load Calibration Procedure
- 4-3. Zero Calibration
- 4-4. Actual Load Calibration
- 4-5. Equivalent Input Calibration
- 4-6. Digital Offset
- 4-7. Increment (This step may be omitted if there is no change.)
- 4-8. Decimal Place
- 4-9. Calibration Protection
- 4-10. Calibration Value Selection
- 4-11. Unit
- 5. SETTING OF FUNCTIONS
- 6. COMPARISON FUNCTIONS
- 7. HOLD FUNCTIONS
- 8. MULTI-HOLD FUNCTION
- 9. WAVEFORM DISPLAY
- 10. VOLTAGE OUTPUT（VOL OUT）
- 11. SCREEN LOCK
- 12. EVENT OUTPUT AT THE END OF GRAPH PLOTTING
- 13. RS-232C INTERFACE
- 14. BCD DATA OUTPUT(OPTION)
- 15. RS-485 COMMUNICATION INTERFACE(OPTION)
- 16. D/A CONVERTER(OPTION)
- 17. DC POWER SOURCE
- 18. ERROR MESSAGES
- 19. SELF-CHECK AND INITIALIZATION
- 20. ABOUT JAPANESE/ENGLISH DISPLAY SELECTION
- 21. BLOCK DIAGRAM
- 22. DIMENSIONS
- 23. INSTALLATION IN A PANEL
- 24. SPECIFICATIONS
- 25. SETTING ITEM CHART
- 26. CONFORMITY TO EC DIRECTIVES