GW Instek GDM-8200A User Manual - Manual (Page 93)

DIGITAL I/O
93
Set the low limit in the same way
as in the high limit. Press the
ENTER key to confirm editing.
The compare measurement
starts right away.
4. Compare
measurement
appears
COMP Indicates Compare mode
2 nd display Shows the compare measurement result:
Pass, High, or Low.
5. Result High If the 2 nd display
shows High, the
result is above the
High limit.
Digital I/O: FAIL Out (Pin 6) and HIGH
Limit FAIL Out (Pin 7) are activated.
Low If the 2 nd display
shows Low, the
result is below the
Low limit.
Digital I/O: FAIL Out (Pin 6) and LOW
Limit FAIL Out (Pin 8) are activated.
Pass If the 2 nd display
shows Pass, the
result is staying
between the High
and the Low limit.
Digital I/O: PASS Out (Pin 5) is activated.
Deactivate
Compare
measurement To cancel the Compare
measurement, press the Shift
key followed by the HOLD
(Comp) key, or simply activate
another measurement.