GW Instek GDM-8200A User Manual - Manual (Page 103)

REMOTE CONTROL
103
calc:aver:min? Returns minimum value stored.
calc:aver:max? Returns maximum value stored.
calc:aver:aver? Returns average value stored.
calc:aver:coun? Returns number of data count.
calc:rel:ref Sets reference value in Relative value measurement.
Parameter: NR2, min, max
Example: calc:rel:ref_1.0 (reference value set to 1.0)
calc:rel:ref? Returns reference value in Relative value measurement.
Parameter: NR2, min, max
calc:db:ref Sets reference value in dB measurement.
Parameter: NR2, min, max
Example: calc:db:ref_1.0 (reference value set to 1.0)
calc:db:ref? Returns reference value in dB measurement.
Parameter: NR2, min, max
calc:dbm:ref Sets reference value in dBm measurement.
Parameter: NR2, min, max
Example: calc:db:ref_1.0 (reference value set to 1.0)
calc:dbm:ref? Returns reference value in dBm measurement.
Parameter: NR2, min, max
calc:lim:low Sets lower limit value in Compare measurement.
Parameter: NR2, min, max
Example: calc:lim:low_1.0 (lower limit set to 1.0)
calc:lim:low? Returns lower limit value in Compare measurement.
Parameter: NR2, min, max
calc:lim:upp Sets upper limit value in Compare measurement.
Parameter: NR2, min, max
Example: calc:lim:low_1.0 (upper limit set to 1.0)
calc:lim:upp? Returns upper limit value in Compare measurement.
Parameter: NR2, min, max
calc:math:mmf Sets factor(M) in Math measurement.
Parameter: NR2
Example: calc:math:mmf_1.03 (Math factor set to 1.03)
calc:math:mmf? Returns factor(M) in Math measurement.
Parameter: NR2
calc:math:mbf Sets offset(B) in Math measurement.
Parameter: NR2
Example: calc:math:mbf_10 (Math offset set to 10)
calc:math:mbf? Returns offset(B) in Math measurement.
Parameter: NR2