GW Instek GDM-8200A User Manual - Manual (Page 107)

REMOTE CONTROL
107
rout:chan Configure channel in advanced mode.
Parameter: Channel, Function, Range, Auto Range
Example: rout:chan 101, 1, 2, 0 (Channel 101, Function 1
(DCV), Range 2 (DCV 1V), Disable Auto Range)
rout:chan? Return channel configurations in advanced mode.
Parameter: Channel, Function, Range, Auto Range
Example: 101, 1, 2, 0 (Channel 101, Function 1 (DCV), Range
2 (DCV 1V), Disable Auto Range)
rout:del Set delay timer for scan.
Parameter: 0 to 9999 (ms)
rout:del? Return delay timer setting for scan.
Parameter: 0 to 9999 (ms)
rout:coun Set number of count for scan.
Parameter: 1 to 999
rout:coun? Return number of count for scan.
Parameter: 1 to 999
rout:func Enable scan related functions.
Parameter: 0 (scan off), 1 (monitor), 2 (step), 3 (scan), 4
(advance)
rout:func? Return scan related function status.
Parameter: 0 (scan off), 1 (monitor), 2 (step), 3 (scan)
Secondary display: CONFigure2 command
conf2:volt:dc Configure 2 nd display to DC Voltage.
Parameter: NR2, min, max
Example: conf2:volt:dc_1 (DC Voltage, 1V range)
conf2:volt:ac Configure 2 nd display to AC Voltage.
Parameter: NR2, min, max
Example: conf2:volt:ac_1 (AC Voltage, 1V range)
conf2:curr:dc Configure 2 nd display to DC Current.
Parameter: NR2, min, max
Example: conf2:curr:dc_10e-3 (DC Current, 10mA range)
conf2:curr:ac Configure 2 nd display to AC Current.
Parameter: NR2, min, max
Example: conf2:curr:ac_10e-3 (AC Current, 10mA range)
conf2:res Configure 2 nd display to 2W Resistance.
Parameter: NR2, min, max
Example: conf2:res_10e2 (2W Resistance, 1kΩ range)
conf2:fres Configure 2 nd display to 4W Resistance.
Parameter: NR2, min, max
Example: conf2:fres_10e2 (Resistance, 1kΩ range)