GW Instek GDM-8200A User Manual - Manual (Page 35)

BASIC MEASUREMENT
35
Select beeper setting
Background Beeper setting defines how the GDM-8200A series
notifies the continuity test result to the user.
Beeper
parameter Pass Beeps when the test result is pass
Fail Beeps when the test result is fail
Off Beep function is turned Off
1. Activate
beeper setting
menu 1. Press the Shift key followed by
the 2nd (Menu) key. The system
menu appears.
2. Press the Down key. The beep
menu appears.
3. Press the Down key. The beep
setting appears.
2. Select the
beep setting To change the setting, press the
Up/Down key.
Beeper type: Pass (beep when pass), Fail (beep when
fail, default), Off (beep off)
3. Go back to the
default display Press the Enter key to confirm.
Press the Exit key to go back to the
default display.