beautypg.com

Connect wire, 1 loosen 2 insert 3 tighten – GW Instek GDM-8200A User Manual User Manual

Page 75

background image

SCANNER (OPTIONAL)

75

Connect wire

Wire selection

Make sure the wires have at least the same Voltage and
Current capacity as the maximum ratings in the

measurement.

Connection

1. Turn the screw left (loose) using the screw driver and

insert the wire. Turn the screw right (tight) and

secure the connection.

1 Loosen

2 Insert

3

Tighten

2. Route the wires as follows, using the two openings

(left and right) at the front cover.