GW Instek GDM-8200A User Manual - Manual (Page 50)

GDM-8200A Series User Manual
50
3. Low limit
setting
1st display Shows the low limit value
2nd display Indicates low limit setting
1. Use the Left/Right key to move
the cursor (flashing point)
between high/low setting, digits,
and decimal point.
2. Change the parameter using the
Up/Down key.
3. Press the ENTER key to
confirm editing. The compare
measurement starts right away.
4. Compare
measurement
appears
COMP Indicates Compare mode
2 nd display Shows the compare measurement result:
Pass, High, or Low.