GW Instek GDM-8200A User Manual - Manual (Page 15)

GETTING STARTED
15
(Temperature) Measures Temperature (page37).
SHIFT + TEMP
(SENSOR) Selects the type of thermocouple
used in the Temperature
measurement (page38).
Measurement keys (Lower row)
AUTO/ENTER As the AUTO key, selects the
measurement range automatically.
As the ENTER key, confirms the
entered value.
SHIFT → AUTO
(RATE)
Selects the measurement update rate:
Slow, Medium, or Fast (page22).
Up/Down Selects the parameter in various
occasions: higher ( ) or lower ( ).
HOLD Activates the Hold function (page48).
SHIFT → HOLD
(COMPare) Activates the Compare measurement
(page49).
TRIG (Trigger) Triggers sample acquisition manually
(page59).
SHIFT → TRIG
(Int/Ext Trigger)
Selects the Internal or the External
trigger source (page59).
Left/Right Selects the parameter in various
occasions: left ( ) or right ( ).
REL Measures the Relative value (page46).
SHIFT → REL
(RELative base)
Manually sets the reference value for
the Relative value measurement
(page46).