beautypg.com

Select channel group and enable scanner – GW Instek GDM-8200A User Manual User Manual

Page 74

background image

GDM-8200A Series User Manual

74

Select Channel group and enable scanner

Background

2 groups, 16 channels each, are available for the scanner.

Group1

CH101 ~ 118

Group2

CH201 ~ 218

Select group
(Jumper J8)

Set the jumper J8 in the center of the board accordingly.
Move the jumper to the right (pins 2-3) for selecting

CH1xx (101 ~ 118), and move to the left (pins 1-2) for
selecting CH2xx (201 ~ 218).

1 2 3

J8

1 2 3

1 2

3

CH201-218

SLAVE

CH101-118

MASTER

J8

Enable scanner
(Jumper J9)

Set the jumper J9 on the rear side of the board
accordingly. Move the jumper up (pins 3-2) to disable the

scanner, and down (pins 2-1) to enable the scanner.

3
2
1

J9

3 2 1

3 2

1

Enabled

Disabled

J9

See also other documents in the category GW Instek Equipment: