GW Instek GDM-8200A User Manual - Manual (Page 109)

FAQ
109
F
AQ
● What is the Output key used for?
● I pressed the EXIT key but cannot get out of Scanner mode.
● The GDM-8200A series performance does not match the specifications.
What is the Output key used for?
The Output key is used for turning the display output on
or off.
I pressed the EXIT key but cannot get out of Scanner mode.
Press the EXIT key, followed by the ACV (Scan) or
DCV (Step) key.
The GDM-8200A series performance does not match the
specifications.
Make sure the device is powered On for at least 30
minutes, within +18°C~+28°C. This is necessary to
stabilize the unit to match the specifications.
If there is still a problem, please contact your local dealer or GWInstek at
[email protected] .