GW Instek GDM-8200A User Manual - Manual (Page 87)

SCANNER (OPTIONAL)
87
Run Scan
Overview
Scan operation
type Scan Measures all specified channel range at
each trigger event. Timer setting (page81)
applies between each scan.
Step Measures a single channel in the specified
range at each trigger event. Timer setting
(page81) applies between each channel.
Monitor Continuously measure one channel.
Run Scan/Step
Activate
Scan/Step 1. Press the Shift key followed by
the ACV key (SCAN) or DCV
key (Step).
2. The STO indicator turns On. The Scan (Step) starts
running and the data is recorded. After running the
predefined count, the Scan (Step) stops running.
Retrigger/Restart
Scan To run the Scan (Step) again, press
the TRIG key. The previous data is
overwritten by the new Scan.
Abort Scan/Step To abort Scan/Step or to go back to
the normal display, press the Shift
key followed by the ACV key (Scan)
or DCV key (Step) again.