beautypg.com

Filter setting – GW Instek GDM-8200A User Manual User Manual

Page 63

background image

SYSTEM/DISPLAY CONFIGURATION

63

Filter setting

Turn on Filter

1. Press the Shift key followed by

the MX/MN (Filter) key.

1st display

Shows the filter count

2nd display

Shows the filter type (flashing)

2. Select the filter type using the

Up/Down key.

3. Move the cursor to filter count

using the Left/Right key.

Change the value using the
Up/Down key.

4. Press the ENTER key to

confirm editing. The Filter

indicator appears on the display.

FILT

Indicates manual Filter setting

Turn off Filter

1. Press the Shift key followed by

the MX/MN (Filter) key. The
Filter indicator will disappear

from the display.

See also other documents in the category GW Instek Equipment: