GW Instek GDM-8200A User Manual - Manual (Page 55)

ADVANCED MEASUREMENT
55
1. Use the Left/Right key to move
the cursor (flashing point)
between high/low setting, digits,
and decimal point.
2. Change the parameter using the
Up/Down key.
3. Press the ENTER key to
confirm editing.
3. View Percentage
1st display Shows the calculated result
2nd display Indicates the Percentage measurement
MATH Indicates Math operation
Dual Display Measurement
Background You can use the 2nd display to show another item, thus
viewing two different measurement results at once. The
following table shows the available options.
1 st Display 2 nd Display
ACV DCV ACI DCI Hz/P
ACV ● ● ● ● ●
DCV ● ● ● ● ●
ACV+DCV — — — — —
ACI ● ● ● ● ●
DCI ● ● ● ● ●
ACI+DCI — — — — —