GW Instek GDM-8200A User Manual - Manual (Page 92)

GDM-8200A Series User Manual
92
Application: Compare measurement
Applicable to
( ) + ( ) +
Background Compare measurement checks and updates if the
measurement data stays between the upper (high) and lower
(low) limit specified.
1. Activate
Compare
measurement Press the Shift key, then the
HOLD (Comp) key.
2. High limit
setting
1st display Shows the high limit value
2nd display Indicates high limit setting
1. Use the Left/Right key to
move the cursor (flashing
point) between high/low
setting, digits, and decimal
point.
2. Change the parameter using
the Up/Down key.
3. Press the ENTER key to
confirm editing and move
to the low limit setting.
3. Low limit
setting
1st display Shows the low limit value
2nd display Indicates low limit setting