GW Instek GDM-8200A User Manual - Manual (Page 88)

GDM-8200A Series User Manual
88
Recall Scan/Step result
Panel operation 1. After the Scan/Step is
completed, the data is stored
internally. Press the Shift key
followed by the ACI (Recall) key.
2. The first channel appears. (example: channel 101)
3. To view the Max/Min/Average
data, press the Left and Right
keys.
4. To move to the next channel,
press the Up/Down key.
5. Press the EXIT key to get out
from recall mode.
Setup and run monitoring
Panel operation 1. Press the Shift key, the 2 ND key
(MENU), the Left key. The Scan
menu appears.
2. Press the Down key followed by
the Left key. The Monitor Scan
setting menu appears.