GW Instek GDM-8200A User Manual - Manual (Page 67)

STORE/RECALL
67
Store Measurement Record
Background The GDM-8200A series can store the measurement
history which can be recalled later for observation and
analysis as in Maximum, Minimum, and Average value.
Note: Previously recorded measurements will be erased
every time the store function is used or if power is reset.
Data count 1 ~ 9999
Not applicable to Store/recall measurement history is not applicable to
Diode/Continuity test
.
Store step 1. Press the Shift key followed by
the DCI (Store) key. The store
menu appears.
2. Move the cursor using the
Left/Right key. Change the data
count using the Up/Down key.
3. Press the Enter key to confirm
editing and to go back to the
previous display.
STO Indicates the measurement history is stored