GW Instek GDM-8200A User Manual - Manual (Page 84)

GDM-8200A Series User Manual
84
6. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
Range 101 ~ 118, 201 ~ 218 (must be the same
or bigger than the Start (Min) channel)
7. When finished, press the
ENTER key. The Timer setting
appears.
8. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
Range 1ms ~ 9999ms
9. When finished, press the
ENTER key. The Count setting
appears.
Range 1 ~ 999
10. Move the cursor to the channel
using the Left/Right key, and
change the value using the
Up/Down key.
11. When finished, press the
ENTER key. The channel
setting appears.
12. The Minimum (first) scanned channel, as set in the
Simple Scan setting, appears. The default setting is
CH101.