GW Instek GDM-8200A User Manual - Manual (Page 20)

GDM-8200A Series User Manual
20
Power Up
Power up steps 1. Connect the power
cord to the AC
Voltage input.
Note
Make sure the ground connector of the power cord
is connected to a safety ground. This will affect the
measurement accuracy.
2. Push to turn On the
main power switch on
the front panel.
3. The display shows the model name and the version
for a few seconds.
Example: GDM-8255A, V2.10
4. Followed by the default measurement settings.
5. And the interface I/O settings.
6. Then the default setting appears.
Example: DCV, Auto, 1V range