GW Instek APS-1102 Control Software User Manual - Manual (Page 94)

8 Maintenance
81
8.1 CD-ROM Management
CD-ROM should be handled carefully paying attention to the followings.
Do not store your CD-ROM under direct sunlight or in high temperature or humidity.
 Store and use the CD-ROM avoiding dusty environment.
 Do not touch the recording surface. It may cause damage or error.
 When the recording surface gets dirty, wipe the surface with dry soft cloth. Do not use solvent such
as benzene.
 Store the CD-ROM horizontally and vertically to avoid twisting or curving.
 Use a felt pen when you write letters to the label surface of the CD-ROM (do not use a pen such as
ball-point pen or pencil of which tip is hard).
8.2 Replace Damaged CD-ROM
If your CD-ROM has been damaged, contact GW Instek or our agent.
For a fee, we will replace it with new one.
8.3 Check Version
The version of this software is displayed in the upper right of the dialog window which appears when
you press [System Setting].
Figure 8-1 System Setting Dialog Window