GW Instek APS-1102 Control Software User Manual - Manual (Page 67)

APS-1102A Control Software User Manual
54
7.6.3 File Reading
Display the Open File dialog by clicking [File] - [Open] (Alt, F, O or Ctrl + O) or the corresponding
button on the Tool Bar. Enter the file name and click OK button. The waveform information will be
read from the specified waveform data file.
7.7 Printing Waveforms
You can print the waveform data created with the "Arbitrary waveform editing tool" as a waveform
image. However, the grid is not printed regardless of the display mode.
When you click [File] - [Print] (Alt, F, P or Ctrl + P), the Print dialog is displayed. For details of the
print setup, see the instruction manual of your printer.