GW Instek APS-1102 Control Software User Manual - Manual (Page 34)

4 Basic Controller
21
4.4 Memory
This section explains the method to communicate with the APS power source and access or reset the
basic setting memory (internal memory).
Figure 4-11 Store and Recall Dialogs
4.4.1 Store
The Store dialog can be opened by any of the following two methods. In the Store dialog, specify the
internal memory number from the [Memory No.] list, and then click OK to execute the store processing
on the APS power source.
 From the Menu Bar, click [Memory] - [Store].
 On the Tool Bar, click the [Store] icon (
4.2.2).
4.4.2 Recall
The Recall dialog can be opened by any of the following two methods. In the Recall dialog, specify the
memory number from the [Memory No.] list, and then click OK to execute the recall processing on the
APS power source. After the APS power source finishes the recall processing, the software inquires the
APS power source, and updates each setting value in the windows of the software to the recalled value.
 From the Menu Bar, click [Memory] - [Recall].
 On the Tool Bar, click the [Recall] icon (
4.2.2).
 Performing the recall operation with the output on results in an error.
4.4.3 Reset
From the Menu Bar, click [Memory] - [Reset]. The connected APS power source is reset to the factory
defaults.
 Performing the reset operation with the output on results in an error.
CAUTION
CAUTION