Preface – GW Instek APS-1102 Control Software User Manual User Manual
Page 4
i
Preface
Thank you for purchasing our Programmable AC/DC Power Source APS Series.
For safe and correct use of the electrical product, please first read "Safety Precautions" on the next
page.
Alert symbols in this manual
This manual uses the following alert symbols.
It contains cautions about working with the program.
This manual consists of the following chapters.
If it is the first time for you to use this product, start with "1. Outline."
1. Outline: Provides an overview of the functions of the Control Software.
2. Installation: Explains the environment required for Control Software to operate and the
installation method.
3. Control Software Operation: Explains the basic operations of Control Software, such as
starting/exiting, the window configuration, the system setting, and so on.
4. Basic Controller: Explains how to operate the "Basic controller" function, one of the primary
functions of the Control Software.
5. Sequence: Explains how to operate the "Sequence" function, one of the primary functions of the
Control Software.
6. Measurements Logging: Explains how to operate the Measurements Logging.
7. Arbitrary Waveform Editing: Explains how to operate the Arbitrary waveform editing tool
(WAVE DESIGNER for APS Series).
8. Maintenance: Explains the management of the CD-ROM, and what to do when it is damaged.
CAUTION