Aps power source setting file, Save as, Save – GW Instek APS-1102 Control Software User Manual User Manual
Page 33: File reading, 3 aps power source setting file
APS-1102A Control Software User Manual
20
4.3
APS Power Source Setting File
Control Software for APS Series handles the following one type of file format as the Basic controller
setting file.
APS power source setting file (extension is .rmt)
This file stores the Basic controller settings except the output ON/OFF setting. This file can be read and
saved by Control Software for APS Series. It cannot be read by the APS power source.
About compatibility with "APS-1102 Control software" accompanying with APS-1102:
APS-1102 power source setting file (*.msf) created with the "APS-1102 control software" cannot
be used with this software.
APS-1102A power source setting file created with this software cannot be used with the
"APS-1102 control software". It is not compatible.
4.3.1 Save As
Saves the APS power source setting file as a new file. The [Save As] dialog can be opened by any of
the following two methods. For newly created data, the Save operation works as "Save As."
From the Menu Bar, select [File] - [Save As].
On the keyboard, press Alt, F, A.
4.3.2 Save
Overwrites and saves to the existing APS power source setting file. Following four methods are
available. For newly created data, the Save operation works as "Save As."
From the Menu Bar, select [File] - [Save].
On the keyboard, press Alt, F, S.
On the keyboard, press Ctrl + S.
On the Tool Bar, click the [Save] icon (
4.3.3 File Reading
Opens the APS power source setting file. The Open File dialog can be opened by any of the following
four methods.
From the Menu Bar, select [File] - [Open].
On the keyboard, press Alt, F, O.
On the keyboard, press Ctrl + O.
On the Tool Bar, click the [Open] icon (
CAUTION