beautypg.com

Open or close the measurements logging window, Open the measurements logging window, Close the measurements logging window – GW Instek APS-1102 Control Software User Manual User Manual

Page 50: Name of each component in the window, Figure 6-1 measurements logging window, Open or close the measurements logging, Window, 1 open or close the measurements logging window, 2 name of each component in the window

background image

6 Measurements Logging

37

6.1

Open or Close the Measurements Logging Window

6.1.1 Open the Measurements Logging Window

Following two methods are available.

 In the [Basic Controller] Menu Bar, select [Tool] - [Logging].
 Click [Logging] icon (

4.2.2) on the [Basic Controller] Tool Bar.

6.1.2 Close the Measurements Logging Window

Click the

in the upper right corner of the [Logging] window.

6.2

Name of Each Component in the Window

a) Menu Bar

b) Tool Bar

c) Log display section

Figure 6-1 Measurements Logging Window

a) Menu Bar

6.3.1

b) Tool Bar

6.3.2

c)

Log display section

6.4

See also other documents in the category GW Instek Equipment: