GW Instek APS-1102 Control Software User Manual - Manual (Page 58)

7 Arbitrary Waveform Editing
45
7.4 Operations on Each Section
This section provides how to operate each section assuming that the operation is performed in the
communication online state.
In the communication offline state, you cannot perform any action requiring communication because the
communication with the APS power source is disabled.
Based on the APS power source side status, you may encounter an error message when setting an item.
Handle the error according to the message content.
7.4.1 Menu Bar
The menu of [Arbitrary Waveform Editing] appears in Figure 7-4.
Opens a waveform information file
Saves the waveform information file
Saves the waveform information in a custom format file
Saves the waveform information in a text format file
Prints the waveform data
Exits the [waveform editing] tool
Restores the waveform data to the previous information
Cancels the undo operation
Cuts the selected waveform data and text
Copies the selected waveform data and text
Pastes the cut/copied information
Deletes the selected waveform data and text
Displays the [New Arbitrary Waveform Editing Panel]
Displays the [Interpolate Panel]
Displays the [Operate Panel]
Displays the [Compress/Expand Panel]
Opens the [Memory Transfer] dialog
Opens the [Memory Clear] dialog
Displays the [Set] dialog
Switches On/Off the grid drawing
File(F)
Setting(O)
Tool(T)
Open(O)... Ctrl+O
Save(S) Ctrl+S
Save As(.wdb) (A)... Ctrl+A
Save As(.txt) (T)... Ctrl+T
Print(P)...
Exit(X)
Undo(U) Ctrl+U
Redo(Y) Ctrl+Y
Cut(T) Ctrl+X
Copy(C) Ctrl+C
Paste(P) Ctrl+V
Delete(D) Ctrl+D
Create(W)
Interpolate(I)
Operate(O)
Compand(P)
Memory Transfer...
Memory Clear...
System Setting(S)...
Grid(G)
Edit(E)
Figure 7-4 Arbitrary Waveform Editing Window Menus