GW Instek APS-1102 Control Software User Manual - Manual (Page 43)

APS-1102A Control Software User Manual
30
Paste
Pastes the setting data on the clip board to the selected line range or cell range. Following three methods
are available.
 From the Menu Bar, select [Edit] - [Paste].
 On the keyboard, press Alt, E, P.
 On the keyboard, press Ctrl + V.
 Row numbers and column items should be matched between the destination data range to be pasted
and the source data range that was copied to the clip board. If the data ranges do not match, the
error dialog shown in Figure 5-8 appears.
Figure 5-8 Error Dialog for Copying Data
CAUTION