GW Instek PSU-Series Programming User Manual - Manual (Page 99)

REMOTE CONTROL
99
Syntax :SYSTem:ERRor:ENABle
:SYSTem:LANGuage:EMULation
Set
Query
Description Sets or queries the command language.
Syntax
Query Syntax :SYSTem:LANGuage:EMULation
NONE|N5700|GEN|PWX
:SYSTem:LANGuage:EMULation?
Parameter/
Return parameter NONE Emulation is not used. This is the default
setting
N5700 N5700/N8700 emulation is used.
GEN GENESYS emulation is used.
PWX PAG emulation is used.
:SYSTem:LANGuage:[:SELect]
Set
Query
Description Sets or queries the command language.
Syntax
Query Syntax :SYSTem:LANGuage[:SELect] SCPI|GEN
:SYSTem:LANGuage[:SELect]?
Parameter/
Return parameter SCPI Use the SCPI command language. This the
default language
GEN Use the GEN command language.
:SYSTem:PREset
Set
Description Presets all the Operation Enable and Questionable
Enable registers.
Syntax :SYSTem:PREset
:SYSTem:VERSion
Query
Description Returns the version of the PSU SCPI version.
Query Syntax :SYSTem:VERSion?
Return Returns the SCPI version as a string.