GW Instek PSU-Series Programming User Manual - Manual (Page 72)

PSU Programming Manual
72
Status Commands
For an overview of all the status registers, their associated register
contents and the system diagram, please see the status overview on
page 103
:STATus:OPERation[:EVENt] ........................................... 72
:STATus:OPERation:CONDition ...................................... 72
:STATus:OPERation:ENABle ............................................ 73
:STATus:OPERation:PTRansition ...................................... 73
:STATus:OPERation:NTRansition ..................................... 73
:STATus:QUEStionable[:EVENt] ...................................... 73
:STATus:QUEStionable:CONDition ................................. 74
:STATus:QUEStionable:ENABle ....................................... 74
:STATus:QUEStionable:PTRansition ................................ 74
:STATus:QUEStionable:NTRansition ................................ 74
:STATus:PRESet ................................................................... 75
:STATus:OPERation[:EVENt]
Query
Description Queries the Operation Status Event register and
clears the contents of the register.
Syntax :STATus:OPERation[:EVENt]?
Return Returns the bit sum of the Operation Status
Event register.
:STATus:OPERation:CONDition
Query
Description Queries the Operation Status register. This query
will not clear the register.
Syntax :STATus:OPERation:CONDition?
Return Returns the bit sum of the Operation
Condition register.