GW Instek PSU-Series Programming User Manual - Manual (Page 64)

PSU Programming Manual
64
Initiate Commands
:INITiate:CONTinuous[:TRANsient] ................................ 64
:INITiate[:IMMediate]:NAME ............................................ 64
:INITiate[:IMMediate][:TRANsient] ................................... 65
:INITiate:CONTinuous[:TRANsient]
Set
Query
Description This command continuously initiates software
triggers for the transient or output triggers.
Syntax
Query Syntax :INITiate:CONTinuous[:TRANsient] {|OFF|ON}
:INITiate:CONTinuous[:TRANsient]?
Parameter
OFF | 0 OFF
ON | 1 ON
Return parameter 0 OFF
1 ON
Example INIT:TRAN 1
Turns on the continuous trigger.
:INITiate[:IMMediate]:NAME
Set
Description The INITiate command starts the TRANsient or
OUTPut trigger.
Syntax :INITiate[:IMMediate]:NAME {TRANsient|OUTPut}
Parameter TRANSient Starts the TRANsient trigger.
OUTPut Starts the OUTPut trigger.
Example INITiate:NAME TRANient
Starts the TRANSient trigger.