GW Instek PSU-Series Programming User Manual - Manual (Page 21)

GETTING STARTED
21
Configuration Settings
Setting Normal Function Settings
The normal function settings (F-01~F-61, F-
70~F-76) and F-88 ~ F-89 can be easily
configured with the Function key.
 Ensure the load is not connected.
 Ensure the output is off.
 Function settings F-90~97 can only be
viewed.
Note
Function setting F-89 (Show Version) can only be
viewed, not edited.
Configuration settings F-90~ F-97 cannot be edited
in the Normal Function Settings. Use the Power
On Configuration Settings. See page 23 for details.
Steps 1. Press the Function key. The
function key will light up.
Function
2. The display will show F-01 on the left and the
configuration setting for F-01 on the right.
VOLTAGE CURRENT
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C V C C
V A
3. Rotate the voltage knob to change
the F setting.
Voltage
Range F-00~F-61, F-70~F-76,
F-88~F-97