GW Instek PSU-Series Programming User Manual - Manual (Page 16)

PSU Programming Manual
16
PSU Series Display and Operation Panel
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C C
A
C V
V
VOLTAGE CURRENT
Display Area
14 15 16 17
18 19 20 21 22 23 24 25 26 27 28
14. Voltage
Meter
Displays the voltage or the parameter number of a
Function parameter.
15. Current
Meter
Displays the current or the value of a Function
parameter.
16. CV LED Lights in green during constant voltage mode.
17. CC LED Lights in green during constant current mode.
18. VSR LED The voltage slew rate enable.
19. LAN LED Lights up when the LAN interface is connected.
20. RMT LED Lights in green during remote control.
21. ERR LED Lights in red when an error has occurred.
22. DLY LED The output on/off delay enable.
23. ALM LED Lights in red when a protection function has been
activated.