GW Instek PSU-Series Programming User Manual - Manual (Page 86)

PSU Programming Manual
86
[:SOURce]:VOLTage[0]:SLEW:RISing
Set
Query
Description Sets or queries the rising voltage slew rate. This is
only applicable for CV slew rate priority mode.
Syntax
Query Syntax [:SOURce]:VOLTage[0]:SLEW:RISing
{(V)|MINimum|MAXimum}
[:SOURce]:VOLTage[0]:SLEW:RISing?
Parameter 0 ~ Vrated/100msec
MIN Minimum rising voltage slew rate
MAX Maximum rising voltage slew rate
Return parameter Returns the slew rate in A/ms.
Example SOUR:VOLT:SLEW:RIS MAX
Sets the rising voltage slew rate to its maximum.
[:SOURce]:VOLTage[0]:SLEW:FALLing
Set
Query
Description Sets or queries the falling voltage slew rate. This is
only applicable for CV slew rate priority mode.
Syntax [:SOURce]:VOLTage[0]:SLEW:FALLing
{(V)|MINimum|MAXimum}
Query Syntax [:SOURce]:VOLTage[0]:SLEW:FALLing?
Parameter 0 ~ Vrated/100msec
MIN Minimum voltage falling slew rate
MAX Maximum voltage falling slew rate
Return parameter Returns the voltage slew rate in A/ms
Example SOUR:VOLT:SLEW:FALL MIN
Sets the falling voltage slew rate to its minimum.