GW Instek PSU-Series Programming User Manual - Manual (Page 71)

REMOTE CONTROL
71
:OUTPut[:STATe]:TRIGgered
Set
Query
Description Turns the output on or off when a software trigger
is generated.
Syntax
Query Syntax :OUTPut[:STATe]:TRIGgered { |OFF|ON }
:OUTPut[:STATe]:TRIGgered?
Parameter OFF | 0 Turns the output off when a software trigger
is generated (*TRG).
ON | 1 Turns the output on when a software trigger
is generated (*TRG).
Return parameter Returns output trigger status of the
instrument.
:OUTPut:PROTection:CLEar
Set
Description Clears over-voltage, over-current and over-
temperature (OVP, OCP, OTP) protection circuits.
It also clears the shutdown and sense protection
circuit. The AC failure protection cannot be
cleared.
Syntax :OUTPut:PROTection:CLEar