GW Instek PSU-Series Programming User Manual - Manual (Page 97)

REMOTE CONTROL
97
:SYSTem:COMMunicate:USB:FRONt:STATe
Query
Description Queries the front panel USB-A port state.
Query Syntax :SYSTem:COMMunicate:USB:FRONt:STATe?
Return parameter 0 Absent
1 Mass Storage
:SYSTem:COMMunicate:USB:REAR:MODE
Set
Query
Description Sets or queries the speed of the rear panel USB B
port. This setting is applied only after the unit is
reset.
Syntax :SYSTem:COMMunicate:USB:REAR:MODE
{|DISable|AUTO|FULL}
Query Syntax :SYSTem:COMMunicate:USB:REAR:MODE?
Parameter 0 | DISable Disable
1 | AUTO Auto detect speed
2 | FULL Full speed
Return parameter
0 Disable
1 Auto detect speed
2 Full speed
:SYSTem:COMMunicate:USB:REAR:STATe
Query
Description Queries the rear panel USB-B port state.
Query Syntax :SYSTem:COMMunicate:USB:REAR:STATe?