GW Instek PSU-Series Programming User Manual - Manual (Page 45)

REMOTE CONTROL
45
Run this query command via the terminal
application after the instruments have been
configured for multi-unit control. See page 42.
ADR 8
IDN?
The identity string for the Master unit will be
returned:
GW-INSTEK,PSU40-38,,T0.01.12345678
Type the following:
ADR 11
IDN?
The identity string for the slave with address 11
will be returned:
GW-INSTEK,PSU40-38,,T0.01.12345678
Note: TDK commands do not use LF (line feed)
codes to terminate commands. See the TDK
Genesys user manual for further information.