GW Instek PSU-Series Programming User Manual - Manual (Page 102)

PSU Programming Manual
102
Return parameter 1 Returns 1 when all the outstanding
commands have completed.
*RCL
Set
Description Recalls the contents stored in memory slot M1, M2
or M3.
Syntax *RCL {|MAX|MIN}
Parameter 0, 1, 2 (as memory M1 , M2, M3)
MIN Recalls the M1 memory contents.
MAX Recalls the M3 memory contents.
*RST
Set
Description Performs a device reset. Configures the unit to a
known configuration (default settings). This
known configuration is independent of the usage
history.
Syntax *RST
*SAV
Set
Description Saves the settings into memory slot M1, M2 or M3.
Syntax *SAV {|MIN|MAX}
Return parameter 0, 1, 2 (as memory M1 , M2, M3)
MIN Saves the M1 memory contents.
MAX Saves the M3 memory contents.
*SRE
Set
Query
Description Sets or queries the Service Request Enable register.
The Service Request Enable register determines
which registers of the Status Byte register are able
to generate service requests.
Syntax
Query Syntax *SRE
*SRE?