GW Instek PSU-Series Programming User Manual - Manual (Page 83)

REMOTE CONTROL
83
Example VOLT:EXT:SOUR?
NONE
External control is not used.
[:SOURce]:VOLTage[0][:LEVel][:IMMediate]
[:AMPLitude]
Set
Query
Description Sets or queries the voltage level in volts.
Syntax [:SOURce]:VOLTage[0][:LEVel][:IMMediate][:AMPLitude
] {(V)|MINimum|MAXimum}
Query Syntax [:SOURce]:VOLTage[0][:LEVel][:IMMediate][:AMPLitude
]?
Parameter 0~105% of the rated output voltage in volts.
MIN Minimum voltage level
MAX Maximum voltage level
Return parameter Returns the voltage level in volts
Example SOUR:VOLT:LEV:IMM:AMPL 10
Sets the voltage level to 10 volts.
[:SOURce]:VOLTage[0][:LEVel]:TRIGgered
[:AMPLitude]
Set
Query
Description Sets or queries the voltage level in volts when a
software trigger has been generated.
Syntax [:SOURce]:VOLTage[0][:LEVel]:TRIGgered[:AMPLitude]
{(V)|MINimum|MAXimum}
Query Syntax [:SOURce]:VOLTage[0][:LEVel]:TRIGgered[:AMPLitude]?
Parameter 0%~105% of the rated voltage output in volts.
MIN Minimum current level.
MAX Maximum current level.
Return parameter Returns the voltage level.
Example SOUR:VOLT:LEV:TRIG:AMPL 10
Sets the voltage level to 10 volts when a software
trigger is generated.