GW Instek PSU-Series Programming User Manual - Manual (Page 34)

PSU Programming Manual
34
7. The RMT indicator will turn on when a remote
connection has been established.
RMT indicator
A V
VOLTAGE CURRENT
VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN
C V C C
GPIB constraints  Maximum 15 devices altogether, 20m cable
length, 2m between each device
 Unique address assigned to each device
 At least 2/3 of the devices turned On
 No loop or parallel connection
GPIB Function Check
Background To test the GPIB functionality, National
Instruments Measurement and Automation
Explorer can be used. This program is available
on the NI website,
www.ni.com ., via a search
for the VISA Run-time Engine page, or
“downloads” at the following URL,
http://www.ni.com/visa/
Requirements Operating System: Windows XP, 7, 8