Brocade FastIron Ethernet Switch Stacking Configuration Guide - Manual (Page 81)

Field descriptions for the show interfaces stack-ports command TABLE 15
Field Description
Port The stack identification number for this unit.
Link Identifies the configuration for modules on this unit.
State Indicates that a priority has been assigned to this stack unit
Dupl Indicates whether the port is configured as half or full duplex
Speed Indicates the port speed
Trunk Indicates whether the port is part of a trunk
Tag Indicates whether the port is tagged or untagged
P Port priority
MAC The MAC address of the port
Name An optional name assigned to the port
NOTE
If a unit is provisional (reserved; and does not have a physical unit associated with the unit ID), its
interface MAC address shows as 0000.0000.0000
Displaying stacking port statistics
The show statistics stack-ports command displays information about all stacking ports in a traditional
stack topology.
device# show statistics stack-ports
Port In Packets Out Packets In Errors Out Errors
1/2/1 22223 4528 0 0
1/2/2 35506 3844 0 0
2/2/1 3161 34173 0 0
2/2/2 24721 3676 0 0
3/2/1 3048 23881 0 0
3/2/2 13540 2857 0 0
4/2/1 2862 13537 0 0
4/2/2 3626 3184 0 0
5/2/1 3183 3621 0 0
5/2/2 3265 13508 0 0
6/2/1 14020 3655 0 0
6/3/1 3652 17705 0 0
7/2/1 17705 3658 0 0
7/3/1 4047 21802 0 0
TOTAL 154559 153629 0 0
Syntax: show statistics stack-ports
Displaying stacking port statistics
FastIron Ethernet Switch Stacking Configuration Guide 79
53-1003090-02