Brocade FastIron Ethernet Switch Stacking Configuration Guide - Manual (Page 154)

Specifies a VLAN ID of the MAC entry to be displayed.
Modes User EXEC mode
Privileged EXEC mode
Global configuration mode
Rbridge sub-configuration mode
Interface sub-configuration mode
Command Output The show hardware mac-entry command output displays the following information.
Output field Description
Total FDB entries The total number of entries in the Forwarding Database
(FDB).
Index The ID of the MAC entry.
MacAddress The MAC address of the entry.
Vlan The VLAN ID of the MAC entry.
Trunk/Port The trunk ID or port number of the MAC entry.
Device The hardware device number.
Type The route type, which can be either static or dynamic.
Age The number of minutes the MAC entry has remained
unused.
SA-Cmd The source address command type, which can be any
one of the following:
• trap-CPU
• forward
• mirror
Da-Cmd The destination address command type, which can be
any one of the following:
• trap-CPU
• forward
• mirror
Examples The following is a sample output from the show hardware mac-entry command for the specific device
with a MAC address of 0000.0090.5eb4 and a VLAN ID of 1.
Brocade# show hardware mac-entry device 0 0000.0090.5eb4 1
Mac 0000.0090.5eb4 Total FDB entries: 1
Index MacAddress Vlan Trunk/Port Device Type Age SA-Cmd Da-Cmd
=============================================================================
1656 0000.0090.5eb4 1 port 63 0 Static 1 FORWARD FORWARD
Stacking Commands
152 FastIron Ethernet Switch Stacking Configuration Guide
53-1003090-02