Brocade FastIron Ethernet Switch Stacking Configuration Guide - Manual (Page 138)

Use the show running-config command to view the mixed stack configuration.
The following example shows the configuration of a mixed stack using the
manual configuration method in which all stack members are configured from
each individual device. The mixed stack contains two ICX 6610 devices in the
backbone and two substacks of three ICX 6450 peripheral devices each.
Brocade# show running-config
stack unit 1
peri-port 1/3/1
peri-port 1/3/2
peri-port 1/3/7
peri-port 1/3/8
exit
stack enable
Unit 2
stack suggested-id 2
stack unit 2
peri-port 2/3/1
peri-port 2/3/2
peri-port 2/3/7
peri-port 2/3/8
exit
stack enable
Unit 3
stack suggested-id 3
stack enable
Unit 4
stack suggested-id 4
stack enable
Unit 5
stack suggested-id 5
stack enable
Unit 6
stack suggested-id 6
stack enable
Unit 7
stack suggested-id 7
stack enable
Unit 8
stack suggested-id 8
stack enable
Use the show stack command to verify the mixed stack configuration.
Brocade# show stack
alone: standalone, D: dynamic config, S: static config
ID Type Role Mac Address Pri State Comment
1 S ICX6610-48P active 748e.f834.4800 0 local Ready
2 D ICX6610-24F standby 748e.f891.c5b8 0 remote Ready
3 D ICX6450-24 member 748e.f86d.7aa7 0 remote Ready
4 D ICX6450-24P member 748e.f8b0.7aa0 0 remote Ready
5 D ICX6450-24P member 748e.f8b0.7cc0 0 remote Ready
6 D ICX6450-48 member 748e.f8d4.02c0 0 remote Ready
7 D ICX6450-48 member 748e.f8d4.2300 0 remote Ready
8 D ICX6450-24P member 748e.f8b0.6c00 0 remote Ready
active standby
+---+ +---+
=2/6| 1 |2/1==2/6| 2 |2/1=
| +---+ +---+ |
| |
|------------------------|
standby active
--- +---+ +---+ +---+ ---
( 2 )3/7--2/1| 6 |2/3--2/1| 7 |2/3--2/1| 8 |2/3--3/7( 1 )
--- +---+ +---+ +---+ ---
active standby
--- +---+ +---+ +---+ ---
( 1 )3/1--2/1| 5 |2/3--2/1| 4 |2/3--2/1| 3 |2/3--3/1( 2 )
--- +---+ +---+ +---+ ---
peri-ports w/o link: 1/3/2, 1/3/8, 2/3/2, 2/3/8
Standby u2 - No hitless failover. Reason: hitless-failover not configured
Current stack management MAC is 748e.f834.4800
Note: no "stack mac" config. My MAC will change after failover.
Mixed Stacking
136 FastIron Ethernet Switch Stacking Configuration Guide
53-1003090-02