Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 80)

WaveRunner Xi-A and MXi-A Oscilloscopes
72 922138-00 Rev A
Changing the Default Printer
If you want to change the default printer, minimize the instrument application
by touching File  Minimize from the menu bar.
Touch the Start button in the task bar at the bottom of the screen.
Select Controls, then Printers and Faxes.
Touch the printer you want to set as the default printer, then touch File, Set as
Default Printer.
Managing Files
Use the instrument's utilities to create waveform files on optional floppy disk,
internal hard drive, or network drives.
Hard Disk Partitions
The instrument's hard disk is partitioned into drive C: and drive D:. Drive C:
contains the Windows operating system and the instrument application
software. Drive D: is intended for data files.