Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 30)

WaveRunner Xi-A and MXi-A Oscilloscopes
22 922138-00 Rev A
Besides channel traces, math and memory trace
labels are also displayed. Labels are displayed only
for traces that are turned on.
As a visual aid, an active channel (i.e., the one
whose settings can be adjusted by the front panel
knobs) is displayed in solid color.
The title bar of the TimeBase label shows the
trigger delay setting. Time per division and
sampling information is given below the title bar.
The title bar of the Trigger label shows the trigger
mode: Auto, Normal, or Stopped. Below the title
bar is given the coupling (DC), trigger type (Edge),
source (C1), level (0 mV), and slope (Positive).
Shown below the Timebase and Trigger labels is
value information for horizontal cursors, including
the time between cursors and the frequency.
Dialog Boxes
The lower portion of the screen contains dialogs where information is shown,
selections are made, and data is input. Typically, the dialogs are organized into
tabular displays, subtabs, or pop-up dialogs. The dialog area is controlled by
touch screen buttons and front panel buttons.
The following Dialog Area controls also provide assistance when entering data:
Message Bar
The message bar continually displays the time and date. It also displays
oscilloscope status and error messages.