Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 38)

WaveRunner Xi-A and MXi-A Oscilloscopes
30 922138-00 Rev A
Vertical Settings and Channel Controls
Adjusting Sensitivity
Touch Vertical  Channel 1, for example, from the
menu bar.
Touch inside the Trace On checkbox to display the
trace. Or, use the VERTICAL front panel buttons to
turn it on.
Turn the volts per division knob. Or you can touch
inside the Volts/Div field and type in a value using
the pop-up keypad.
The voltage that you set is displayed in the
Volts/Div field and in the trace descriptor label.