Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 23)

Getting Started Manual
922138-00 Rev A 15
B
Front Panel Buttons and Knobs
The control buttons of the WaveRunner Xi Series front panel are logically
grouped into analog and special function areas. Analog functions are included
in the Horizontal, Trigger, and Vertical groups of control buttons and knobs.
The following table provides an explanation of the front panel push buttons
and knobs:
Trigger Controls

L EVEL
- Selects the trigger
threshold level. The Level is
indicated in the Trigger
descriptor label:

Push the L
EVEL
knob to have the oscilloscope find the level automatically.

S ETUP
- Displays the trigger setup dialog. Push the button again to close the
dialog.

A
UTO
- Triggers the oscilloscope after a time-out, even if the trigger
conditions are not met.

N ORMAL -
Triggers the oscilloscope each time a signal is present that meets
the conditions set for the type of trigger selected.

S INGLE -
Arms the oscilloscope to trigger once (single-shot acquisition)
when the input signal meets the trigger conditions set for the type of
trigger selected. If the oscilloscope is already armed, it forces a trigger.

S TOP
- Prevents the oscilloscope from triggering on a signal.