Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 105)

Getting Started Manual
922138-00 Rev A 97
B
messaging and workgroup applications (including e-mail, voice mail, and fax)
to work through a single client, such as the Exchange client included with
Windows 95 and Windows NT. MAPI uses the default Windows e-mail
application (usually Outlook Express). SMTP (Simple Mail Transfer Protocol) is
a TCP/IP protocol for sending messages from one computer to another
through a network. This protocol is used on the Internet to route e-mail. In
many cases no account is needed.
If you chose MAPI, touch inside the Originator Address (From:) field and use
the pop-up keyboard to type in the instrument's e-mail address. Then touch
inside the Default Recipient Address (To:) field and use the pop-up keyboard
to enter the recipient's e-mail address.
If you chose SMTP, touch inside the SMTP Server field and use the pop-up
keyboard to enter the name of your server. Touch inside the Originator
Address (From:) field and use the pop-up keyboard to type in the instrument's
e-mail address. Then touch inside the Default Recipient Address (To:) field
and use the pop-up keyboard to enter the recipient's e-mail address.
You can send a test e-mail text message by touching the Send Test Mail
button. The test message reads "Test mail from [name of oscilloscope's email
address]."
Acquisition Status
For each general category of oscilloscope operation, you can view a summary
of your setups. These dialogs are not accessible through the Utilities menu,
but are instead accessed from the menu bar drop-down menus. The categories
are as follows:

Vertical - select Channels Status . . . from drop-down menu

Timebase - select Acquisition Status . . . from drop-down menu

Trigger - select Acquisition Status . . . from drop-down menu

Math - select Math Status . . . from drop-down menu
In addition to these dialogs, summaries are also provided for XY setups,
memory (M1-M4) setups, and time stamps for sequence mode sampling.