Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 111)

Getting Started Manual
922138-00 Rev A 103
B
3. If you elected to activate by internet, enter the Activation ID (Product Key
number on the bottom of the oscilloscope) number when prompted to do
so, and then click Next. Windows Activation begins.
4. If you elected to activate by phone, select the country the oscilloscope is
located in. Then dial the number provided. You are asked to repeat (over
the phone) the installation ID listed on the screen. A 7-part number is then
provided to you over the phone. Enter the numbers on the empty boxes at
the bottom of the screen. Click Next when you are done.
5. When activation is completed, the Thank You! screen is shown. Click OK.
6. Check the revision levels of the X-Stream software, virus definitions, and
Windows updates. Visit the vendors’ Web sites and download all
necessary updates.