Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 76)

WaveRunner Xi-A and MXi-A Oscilloscopes
68 922138-00 Rev A
Auto Save
You can also enable Auto Save from this dialog by touching one of the Auto
Save buttons:
Wrap (old files overwritten) or Fill (no files overwritten).
CAUTION. If you select Fill, you can quickly use up all disk space on
your hard disk.
Recalling Waveforms
Touch File  Recall Waveform... from the menu bar.
On the Recall Waveform dialog, touch the Recall
From button.
If you selected Memory, touch inside the Source field
and select a memory location: M1 to M4.
If you selected File, touch inside the Destination field
and select a memory location in which to store the
file.
Touch inside the Show only files field and select an area to limit the search to:
channels, math functions, or memory.