Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 50)

WaveRunner Xi-A and MXi-A Oscilloscopes
42 922138-00 Rev A
3. Touch a Channel, Memory, or Math trace to
open a pop-up dialog that displays a shortcut to
the Decode Setup dialog box
Please refer to the Low Speed Serial Data Trigger manual or the Online Help
on your oscilloscope for Serial Trigger information and details.
TriggerScan
TriggerScan is a debugging tool that helps you quickly find rare waveform
glitches and anomalies. With TriggerScan, you can build a list of trigger setups
to look for rare events and automatically sequence through each one.
TriggerScan can use any type of trigger setup available including edge, width,
and qualify as well as Smart Triggers (such as, glitch and runt triggers).
TriggerScan automates two key processes in triggering rare events:
1. Trains the system by looking at normal acquired waveforms. During
the training, the oscilloscope analyzes the waveforms to determine
what waveforms normally look like. Using this information, it
generates a list of smart trigger setups to trigger on abnormal
situations.
2. Loads the smart trigger setups from the Trainer and cycles through
these. As triggers occur, they are overlaid on the screen. All acquisition
settings are preserved and you can use all the functions of the
oscilloscope to find the root cause of these anomalies including,
WaveScan, Histograms, and advanced analysis.
Training TriggerScan
The TriggerScan Trainer inspects a currently acquired waveform and
automatically builds a list of common trigger setups used to find rare events.