Teledyne LeCroy WaveRunner МXi-A Getting Started Manual - Manual (Page 35)

Getting Started Manual
922138-00 Rev A 27
B
dialog. The parameter automatically appears below the grid.
Creates a zoom trace of the channel signal. The zoom trace
becomes active, and you can use the Vertical and Horizontal
controls to modify its scale and position.
Opens a Math selection pop-up menu. You can then select a
math function for the active channel from this menu without
leaving the Channel Setup dialog. The Math trace is then
displayed in its own grid.
Copies the channel trace into its corresponding Memory
(Reference Waveform) location. For instance, C1 is loaded
into M1, C2 is loaded into M2, etc.
Automatically performs a vertical scaling that fits the
waveform into the grid.
Opens a Labeling pop-up menu that allows user-defined
labels tied to the waveform.
Another example is these buttons that appear at the bottom of the Measure
Px
1
dialogs. Each button opens a menu from which to choose a math trace (F1
to Fx) to display the functions named in the buttons:
By using these buttons you can remain in the Measure dialog to set up other
options.
1
The number of parameters and math traces available depends on the software options loaded on
your scope.